home *** CD-ROM | disk | FTP | other *** search
/ EnigmA Amiga Run 1997 July / EnigmA AMIGA RUN 20 (1997)(G.R. Edizioni)(IT)[!][issue 1997-07 & 08][EAR-CD IV].iso / lightwave / cgplwlist / cgplw02501-02750.txt / 000155_doylem@iia.org_Tue Feb 14 21:26:21 PST 1995.msg < prev    next >
Text File  |  1995-02-19  |  2KB  |  38 lines

  1. Article: 2657 of comp.graphics.packages.lightwave
  2. Xref: netcom.com comp.graphics.packages.lightwave:2657
  3. Path: netcom.com!ix.netcom.com!howland.reston.ans.net!gatech!udel!news.mathworks.com!uunet!in1.uu.net!ankh.iia.org!doylem
  4. From: doylem@iia.org (M. Doyle)
  5. Newsgroups: comp.graphics.packages.lightwave
  6. Subject: Re: Path Extrude novice needs help
  7. Date: 14 Feb 1995 04:00:55 GMT
  8. Organization: International Internet Association.
  9. Lines: 22
  10. Message-ID: <3hp9tn$o64@ankh.iia.org>
  11. References: <3hj27o$ihs@ankh.iia.org> <9502121448.AA002ai@agog.demon.co.uk>
  12. NNTP-Posting-Host: iia.org
  13. X-Newsreader: TIN [version 1.2 PL2]
  14.  
  15. Gwynne Reddick (gred@agog.demon.co.uk) wrote:
  16. : M. Doyle (doylem@iia.org) wrote:
  17.  
  18. : : PS - In a related problem, is there any way to switch the camera from not 
  19. : : aligned to path to aligned to path in the same scene?
  20.  
  21. : Is this to do with the Camera doing a 180 degree flip and back again over
  22. : about ten frames? If it is, try moving your tube/camera path away from
  23. : layout's central axis. We had this problem with some tunnel shots we were
  24. : doing - if the camera crossed over from say +Z to -Z whilst moving in the Y
  25. : axis, it would exhibit the above behaviour. Moving the path so that it was
  26. : only ever in either + or - Z seemed to solve the problem. Does this make
  27. : sense?
  28.  
  29. : Gwynne.
  30.  
  31. Yes, Gwynne, lots of sense. Though I didn't overtly post it, I *was* 
  32. having that stupid camera flip, then flop, then flip... I'll give your 
  33. suggestions a try.
  34.  
  35. Thanks!
  36. Mike
  37.  
  38.